Drip Irrigation

RainBird Xeri-Bug Drip Emitters
RainBird Xeri-Bug Drip Emitters

Ideal for watering the root zones of plants, trees, and container plants. Xeri-Bugs emit water at rates of 0.5, 1.0 and 2.0 gallons-per-hour (GPH) which allows soils to absorb water more completely into the root zones of plants. Xeri-Bugs are an ideal choice for those wishing to to conserve water or eliminate excessive run-off.


$0.78

Orbit Adjustable Quad Manifold
Orbit Adjustable Quad Manifold

4-Port Adjustable Flow Manifold

  • Four 1/4" barbed ports with threads (caps included)
  • Flow control for all four ports
  • Internal Pressure Reduction - Ideal for retro-fitting underground irrigations systems

 


$11.87

Apollo 8 Manifold
Apollo 8 Manifold

8-Port Adjustable Flow Manifold

  • Eight 1/4" barbed ports with threads (caps included)
  • Individual Flow Control adjustment for each port - Permits precise flow adjustment for each low-volume head
  • Easy-Access Filter - Reduces nozzle plugging
  • Internal Pressure Reduction - Ideal for retro-fitting underground irrigations systems

$19.21

¼” Emitter Tubing Stake
¼” Emitter Tubing Stake

Use this stake to hold 1/4 In. distribution or soaker tubing in place.

  • Use to hold 1/4 In. drip tubing in place
  • Easy to install

 


$0.65

12” Extension Riser, Barb x 10/32”
12” Extension Riser, Barb x 10/32”

For use in raising up Micro-Sprays on a movable stake.


$2.13

6” Extension Riser, Barb x 10/32”
6” Extension Riser, Barb x 10/32”

For raising up a micro spray nozzle on a movable stake.


$1.19

Y-Filter w/ Clean Out Cap
Y-Filter w/ Clean Out Cap

3/4" FHT x MHT Drip Filter

Filter water before it enters the drip system to avoid clogged drip emitters and low drips heads. Useful Y-filter controls debris. volume


$21.42

¼” x 50’ Emitter Tubing
¼” x 50’ Emitter Tubing

1/4" Distribution Tubing

This universal tubing works with most new or existing drip systems. To distribute water above or below ground from main pipe to drippers, misters, and low volume sprinkles.


$7.99

¼” x 100’ Emitter Tubing
¼” x 100’ Emitter Tubing

$14.03

¼” x 500’ Emitter Tubing
¼” x 500’ Emitter Tubing

$61.20

Drip Tubing Punch Tool
Drip Tubing Punch Tool

Punch Tool

  • Allows quick and easy punching of 1/2"

$1.70

¼” Insert Plug
¼” Insert Plug

1/4" Barb End Plug

  • 1/4" barb connections
  • For use with 1/4" distribution or soaker tubing
  • Universal - works with most new or existing drip irrigation system

$0.21

¼” Insert Elbow
¼” Insert Elbow

1/4" Barb Elbow

  • 1/4" barb connections
  • For use with 1/4" distribution or soaker tubing
  • Universal - works with most new or existing drip irrigation systems

$0.32

¼” Insert Tee
¼” Insert Tee

1/4" Barb Tee

  • 1/4" barb connections
  • For use with 1/4" distribution or soaker tubing
  • Universal - works with most new or existing drip irrigation systems

 


$0.32

¼” Insert Coupling
¼” Insert Coupling

1/4" Barb Coupling

  • 1/4" barb connections
  • For use with 1/4" distribution or soaker tubing
  • Universal - works with most new or existing drip irrigation systems

$0.27

Half Micro Spray
Half Micro Spray

These low volume sprinkler heads are ideal for watering flowers and shrubs. The control knob adjusts water flow from 0 - 29 gallons per hour at 25 PSI. works with either 1/4 in. tubing or easily threads into a standard 10-32 in. threaded


$1.53

Quarter Micro Spray
Quarter Micro Spray

Quarter Pattern

These low volume sprinkler heads are ideal for watering flowers and shrubs. The control knob adjusts water flow from 0 - 29 gallons per hour at 25 PSI. works with either 1/4 in. tubing or easily threads into a standard 10-32 in. threaded


$1.53

Full Micro Spray
Full Micro Spray

These low volume sprinkler heads are ideal for watering flowers and shrubs. The control knob adjusts water flow from 0 - 29 gallons per hour at 25 PSI. works with either 1/4 in. tubing or easily threads into a standard 10-32 in. threaded


$1.53

12” Tubing Stake
12” Tubing Stake

12" Stake

Holds Micro-Spray Nozzle (not included)


$2.52

¾” MPT Pressure Regulator
¾” MPT Pressure Regulator

25 psi 3/4" FPT x MPT

This pressure regulator is used to reduce water pressure to 25 psi and is compatible most new or existing drip systems.


$11.05

9" Spring-Loaded Pop-up Micro Riser
9" Spring-Loaded Pop-up Micro Riser

This spring-loaded riser pops up 9 In. when water is on, then drops out of sight when not in use. Attaches to any 10-32 male thread micro watering head and to 1/4 in. distribution tubing.


$13.18

0-4 GPH Flag Dripper (Adjustable)
0-4 GPH Flag Dripper (Adjustable)

4 GPH

This easy to use and maintain dripper is ideal where spot watering is called for. Included is a self piercing inlet, for easy installation and a removable top for easy cleaning.


$1.19

¼” Barb Shut-Off Valve
¼” Barb Shut-Off Valve

Would you like to control the water flow to plants or shrubs in your Micro Drip Now you can will the Barbed Shut-off Valve. Simply insert the Barbed Valve into any type if 1/4 in. tubing and now you have control over water flow.


$1.45

Micro Rotating Sprinkler
Micro Rotating Sprinkler

Mini Rotating Sprinkler

Flow control knob adjusts water flow from 0-30 gallons per hour at 25 PSI. This mini rotates 360 degrees with a 10 ft. maximum spray radius. Works with either in. tubing or easily threads into a standard 10-32 in. threaded adapter.


$2.47

¼” x 100’ Porous Soaker Tubing
¼” x 100’ Porous Soaker Tubing

1/4" x 100' Porous

This easy to install tubing provides full length, slow and steady flow for deep root It is ideal for gardens, flowerbeds, closely planted areas, potted plants around trees. watering.


$34.85

Rainbird Micro True Spray (F.C.)
Rainbird Micro True Spray (F.C.)

Xeri-Sprays™ 360° True Spray
Broadcast Emission Devices


$2.38

1/2" Figure 8 End Fitting

This easy-to-Install fitting is used to close off the end on 1/2" drip tubing.

  • For use with all sizes of 1/2" drip distribution tubing
  • No special tools or glue required
  • Removable for winterizing or system flushing

$0.51